Features & Benefits

How TagMatiks Core Can Be Used to Integrate RFID Easily For Your Organization


TagMatiks Core software easily integrates with any existing RFID technology because it has support for multiple reader providers including Impinj, Zebra, ThingMagic, and Alien along with any reader that supports LLRP. TagMatiks Core also supports Gen2v2 RFID tags.


Each read zone has the capability to have completely customizable feedback based on the number of GPIO ports available on the devices in that readzone. Do you want a motion sensor on one device to trigger the start read, while another devices electric eye triggers the stop? Simply select this in the GPI Settings, and click save; you have total control!


Using the Read Zone Manager, you can map different devices and antennas together to make a read zone that fits your business needs. For example, you can add all of the devices connected to receiving door portals into one read zone, name it Receiving, and collect all the receiving data together. With TagMatiks Core’s Direction feature, you can easily tell which way your items are moving, by simply configuring the direction settings in the read zone. This will add the direction data to each tag. By adding an IN or OUT designation to each tag, this will organize your data even further. You can create physical read zones that contain all the devices in a specific location, and add a location name to that read zone. This will add that location data to each tag that was read in that location so you can easily track exactly where each item has been, and where each item is now.


We have integrated the basic tag operations capability into TagMatiks Core middleware solution to be a complete solution. Here you can read from either a single device or read zone to test the reads, or to perform the Write, Lock, or Kill operations on a tag.


TagMatiks Core is our RFID middleware solution, so it is imperative to be able to access all reader management functionalities available. You can also manage your printers and print tags through the API’s available. Anything that you can do with a mouse through the TagMatiks Core web portal, you can do with the API’s.


Each reader, when added to TagMatiks Core, will pull all the data about that reader out to show you in our software. These details include the reader ID, firmware version, model name, the RF settings of reader mode, search mode, and session, along with many more. These are pulled straight from the reader so you know they are accurate and will give you the information you need about your reader when you need it. Not only can you see all of those settings for each of your readers, you can also change many of the settings to fit your own needs. For example, you can change which antennas are enabled, the power levels of each antenna, and the RSSI cutoff value for each antenna. You can also set up a duplicate elimination time for each individual reader to provide aggregation to the data, as well as filter the tag reads with an EPC mask.


See even more quickly how many readers you have that are in use, ready, or disconnected with those added statistics on the top of the reader details page for you. There is also the Last Heartbeat feature being added so that you can see the last date and time that each reader was connected to TagMatiks Core.


With Administrator permissions, you can control what all the other users are able to access. You can also add, edit, and delete users easily, right from the TagMatiks application.


With the TagMatiks Core Process Manager, once you configure your endpoint, there is nothing left for you to do. Simply set it and forget it, the data will continuously be exported. You can even export the same data through multiple different endpoints at the same time! Processes also support the decoding of multiple tag data standards, including SGTIN-96, SGTIN-198, GRAI-96, and GIAI-96 and will decode any applicable tags before sending the data to the configured endpoint, so you do not need any software in between to convert that data for you. Endpoints currently supported are multiple different databases and API’s, SalesForce, and flat files. Full details on endpoint support can be found in the TagMatiks Core White Paper, and don’t worry, if you don’t see your endpoint listed, we can easily integrate with most systems.


No matter where all of your devices are in the world, you can manage all of them from the TagMatiks Core Reader Manager and Printer Manager on the cloud. You’ll also have access to every device’s settings, and can change them anywhere, anytime. Setup only takes a few minutes! Once the device is connected to the network, simply enter the devices IP address into TagMatiks Core and your device is connected. You can even install and connect this entire system in less than a day!


This means that you can access this application from anywhere you have internet access. You do not have to manage this software in house, which is going to save you a lot of money, and allow your solution to grow with you.

Applications with TagMatiks Core

Explore applications where TagMatiks Core can be used to feed into your existing business systems or in conjunction with another TagMatiks application
TagMatiks Asset Tracking Software

Cutdown on manual shipping and receiving and take advantage of RFID for your dock doors. Attached RFID at the pallet, case or item level to assist in workflows and


Many businesses take advantage of a two or three bin Kanban system for streaming inventory management. Although this time tested process is valuable for improving


Warehouses and distribution centers have a tremendous amount of inventory. The management of this inventory is paramount to business operation.


RFID provides the ability to track the production of your goods and raw material. Capture key data such as when each product reaches a specific stage of

Would you like to see TagMatiks Core in action? Give us a call at 1-408-739-3500
to schedule a software demonstration

Frequently Asked Questions

Why should I use an RFID middleware like TagMatiks Core?

TagMatiks Core manages your RFID readers and hardware as well as filters and massages data as it gets collected. In addition, it can integrate data back to your business applications and systems.

What RFID readers and devices are supported by TagMatiks Core?

TagMatiks Core supports most industry leading fixed and overhead RFID readers. The solution is Zebra Validated and new devices continue to be added frequently. Please contact us for the list of the latest supported devices.

What type of data is collected from TagMatiks Core?

TagMatiks Core collects RFID tag data (memory banks) as well as important meta data such as which device collected the data, at which time and how often.

Can I use TagMatiks Core and another TagMatiks application?

Yes, TagMatiks Core has out of the box support with other TagMatiks applications.

What types of filters are available in TagMatiks Core?

TagMatiks Core includes a myriad of filters including time based filters, content based filters and business logic filters.